All data values in Location 0 (L00) through Location 40 (L40) are function settings for heater operation. The description of the location functions, along with the data values which can be entered in each, are listed with the factory preset default data values. In most situations, only a few location data values need to be changed at the time of installation.
NOTE: Contact your power company or Steffes with any questions about which data value to enter for a specific location so the heater will function as desired.
All data values in Location 41 (L41) through Location 55 (L55) are displayed in HEX and are "read only" values. Refer to the HEX Value Conversion Table to determine the actual Decimal Values or Binary Values. All conversions in the following function locations should be made from HEX to Decimal except in cases where it is indicated that the Binary Number should be used
NOTE: The data values in "Read Only" function locations cannot be edited.