L07 - 2000 Series
Click here to see this page in full context

Location - L07 2000 Series

Factory

Default Value

Description / Data Value

d00

Display Operation Mode

This location sets the display operation mode for room temperature and brick core temperature.

Data Value Range:  d00 to d04

d00 =

will allow for only room temperature adjustment

d01 =

will allow for only room temperature adjustment; however, the M button must first be depressed for a few seconds

d02 =

will allow for room and core temperature to be edited after the M button is depressed for a few seconds

d03, d04 =

currently not utilized

NOTE: If using manual charge control, the data in this location should be set to d02.  The number of seconds which the M button must be depressed is set in Location 15 (L15).