|
Factory Default Value |
Description / Data Value |
|---|---|
|
d00
NSPI: d24 |
Time value for peak timer #1 Used in special applications ONLY in conjunction with Location 34 (L34).
NSPI: d24 indicates a delay of 240 minutes (4 hours) from the start of the Peak period (usually 7:00 AM) or power being reset to the unit. The timers in L25, L26, and L27 add an additional hour so that the A-mode begins 5 hours after the start of the peak time, usually 12:00 noon. If eliminating the timer in L25, set this to d30. Data Value Range: d00 to d99 (10 minute periods) |