|
Factory Default Value |
Description / Data Value |
|---|---|
|
d00
NSPI: d30 |
Time value for peak timer #2 Used in special applications ONLY in conjunction with Location 35 (L35) and begins immediately following the timer in L36.
NSPI: d30 indicates a delay of 300 minutes (5 hours) from the end of the L36 time delay, usually 11:00 AM). The timers in L25, L26, and L27 prevent the A-mode from heating from 11:00 Am to 12:00 noon. If eliminating the 1-hour delay at 11:00 PM, change the timer in L25 as indicated and set this to d24. Data Value Range: d00 to d99 (10 minute periods) |