Transceiver (Non-Current XCVR1) - Component Location 5-Pole Indoor

1 - Line Voltage Select Jumper

2 - Relay #1 LED (marked "Relay 1")

3 - Relay #2 LED (marked "Relay 2")

4 - Load Connection Area

5 - Transmit/Receive Jumper ("TR/RC")

6 - SecureGround™ Ground Bond Screw

7 - Controlled Load Line Voltage Conductors

8 - PCB Line Voltage Conductor “Control Circuit”

9 - Low Voltage Ground Screw 

10 - Security Lockout/Seal Loop (N/A on Indoor Enclosure)

11 - Low Voltage Terminal Block

12 - Temperature Sensing Thermistor (N/A on Indoor Enclosure. Install outdoor sensor if desired.)

13 - Low Voltage Connection Area

14 - Outside Temperature Indicator LED ("L3")

15 - PLC Signal Indicator LED ("L4")

16 - DIP Switches

17 - Line Voltage Terminal Block

18 - Relay LED's for Expansion Board Relays

19 - THER Jumpers – Must be ON for all Transceivers