THIS PROCEDURE MUST BE PERFORMED BY A QUALIFIED TECHNICIAN.
NOTE: This menu can only be accessed within the first two (2) minutes of operation. After this time, entry into the Configuration Menu is denied, unless the heater is powered off and back on again. This feature can be removed in L052.
Cycle Power
Power the heater back off and back on.
Set Time of Day
Press and release the "M" button until the faceplate displays "CLOC". Use the up and/or down arrows to set the time of day. Time is displayed on a 12-hour clock with a flashing light to indicate a.m. or p.m. hours.
Note: Steffes time clock module DOES NOT recognize daylight savings time (2100/3100/4100/5100 Series Only)
Set Day of the Week
Press and release the "M" button until the faceplate displays "dAY". Use the up and/or down arrow to move to the correct day of the week.
Return to Normal Display
Press and release the "M" button to return to normal operation.
NOTE: The clock's built-in power back-up is approximately 3 days; thus, it is not recommended to turn off the main power supply (breaker) feeding the heater. Doing so may cause the heater to lose its time and day settings. Refer to your Owner's Manual for directions to alternative methods in turning the heater off.