This DIP Switch setting is used to match the room heating unit’s switch for Anticipated Peak to the configuration of the power company’s signaling device. This DIP Switch operates like DIP Switch #1. When the switch is in the "OFF" position, a switch contact closure in the power company’s signaling device will initiate an anticipated peak period. When the switch is in the "ON" position, an open switch in the power company’s signaling device will initiate an anticipated peak period.
OFF = power company’s switch closes for anticipated peak control
ON = power company’s switch opens for anticipated peak control
NOTE: If the Power Line Carrier option is utilized, this DIP switch must be in the "OFF" position.