|
0
|
0 to 255
|
All Systems
With Processor Control board rev. G or lower
Save/Restore Program Location Default Settings - Used to save preferred default values or to load previously saved or factory default values. When one of the following values is entered, the action listed is taken and the location resets to a value of zero (0).
|
Value
|
Action Triggered
|
|
1
|
Start PLC Channel Scan Testing.
|
|
20
|
Load configuration saved with value of 120.
|
|
30
|
Load configuration saved with value of 130.
|
|
40
|
Load configuration saved with value of 140.
|
|
50
|
Load configuration saved with value of 150.
|
|
NOTE: Saves can only be performed once without downloading new Firmware
|
|
99
|
Save configuration to be retrieved from 199.
|
|
120
|
Save configuration to be retrieved from 20.
|
|
130
|
Save configuration to be retrieved from 30.
|
|
140
|
Save configuration to be retrieved from 40.
|
|
150
|
Save configuration to be retrieved from 50.
|
|
199
|
Load configuration saved with value of 99.
|
|
255
|
Load the "Factory Defaults".
|
|
NOTE: Factory Defaults for 255 bit will be overwritten if saving the the 99 bit.
|
|
|
All Systems
With Processor Control board rev. H with version 2.08 software only.
Save/Restore Program Location Default Settings - Used to save preferred default values or to load previously saved or factory default values. When one of the following values is entered, the action listed is taken and the location resets to a value of zero (0).
|
Value
|
Action Triggered
|
|
1
|
Start PLC Channel Scan Testing.
|
|
20-92
|
Load configuration saved with value of 120-192 respectively.
|
|
NOTE: Saves can only be performed once without downloading new Firmware
|
|
99
|
Save configuration to be retrieved from 199.
|
|
120-192
|
Save configuration to be retrieved from 20-92 respectively.
|
|
199
|
Load configuration saved with value of 99.
|
|
255
|
Load the "Factory Defaults".
|
|
NOTE: Factory Defaults for 255 bit will be overwritten if saving the 99 bit.
|
|
The following values are pre-loaded in replacement circuit boards:
|
|
20
|
Nova Scotia
|
2100
|
|
21
|
US Standard
|
2100
|
|
22
|
Ontario "Stand-Alone"
|
2100
|
|
23
|
Ontario "Master"
|
2100
|
|
24
|
Ontario "Slave"
|
2100
|
|
30, 40, 50, 60, 70, 80, 90
|
Nova Scotia
|
3120, 4140, 5140...
|
|
31, 41...
|
US Standard
|
3120, 4140, 5140...
|
|
32, 42...
|
Ontario
|
3120, 4140, 5140...
|
|