Location L002

Factory

Default

Range

Description / Function

0 to 255

2100 Series

Faceplate Display Configuration - Specifies the end user preferences for basic operating of the control panel and configuration of information displayed.

Value	Option Selected
1	Display temperatures in Celsius. Otherwise, temperatures are displayed in Fahrenheit.
2	Display 24-hour time clock. Otherwise, time is displayed on a 12-hour clock with an a.m./p.m. indicator.
4	Faceplate display goes blank after one minute of inactivity.
8	2100 Series Only. Room temperature set point can be edited at the faceplate by using the up and down arrow buttons. If this option is selected it is recommended that only one option be selected in L003.
16	Brick core charge set point can be edited at the faceplate. Only applicable if the value in L010 and/or L011 is set to two (2) or six (6).
32	Enables the Edit Mode Activation Delay as described in L022. To enter the Menu when the delay is activated, press and hold the M button and then release.

0 to 255

3100/4100/4200/5100 Series

Faceplate Display Configuration - Specifies the end-user preferences for basic operating of the control panel and configuration of information displayed.

To determine the value for this location, check the options desired from the list below. Then, add the numbers from the "Value" column and enter the sum into this location.

Value	Option Selected
1	Display temperatures in Celsius. Otherwise, temperatures are displayed in Fahrenheit.
2	Display 24-hour time clock. Otherwise, time is displayed on a 12-hour clock with an a.m./p.m. indicator.
4	Faceplate display goes blank after one minute of inactivity.
8	Not used in 3100, 4100, 4200, or 5100 Series.
16	Brick core charge set point can be edited at the faceplate. Only applicable if the value in L010 and/or L011 is set to two (2) or six (6).
32	Enables the Edit Mode Activation Delay as described in L022. To enter the Menu when the delay is activated, press and hold the M button and then release.

Location 2 (L002)