WARNING
Risk of fire. Can cause personal injury or death. DO NOT operate Serenity if damage to the insulation panels on the inner sides of the brick core occurs.
Load the bricks by starting at the back of the brick core and working forward. Make sure the bricks are placed so the grooved side is facing up and the ridges are on the left and right.
- Install bricks carefully to avoid damage to the insulation panels.
- Remove loose brick debris to prevent uneven stacking of brick, as this can make installation of the elements and the brick core temperature sensor difficult.
- Brick rows MUST line up front to back and side to side. (Figure 4)
- Alternate the direction of the brick’s indicator (Figure 3) in every other brick row. (Figure 5)
- Keep bricks tight to center.
Figure 3
Figure 4
Figure 5