|
Model |
Item # |
|---|---|
|
4210 |
5903025 |
Proper brick loading is extremely important to the operation of the Steffes heating system.
Heater must NOT be operated unless ALL brick is loaded. Operating the heater without all of the brick installed will cause significant damage to the heater and/or a hazardous condition.
Bricks are specific for each type of heating system (i.e., 2100 Series, Comfort Plus/Serenity, and ThermElect) DO NOT substitute!
Brick in a Steffes heating system will not be adversely affected by moisture; however, the brick will hold the moisture. When the system is heated up, the moisture will quickly come out of the brick and will damage the insulation and/or finish on the heating system. Make sure all brick is dry before installing.
Impurities in the air will be pulled into and through the heating system; however, will NOT contaminate the brick. If paint fumes or other organic substances are pulled into the brick core of the heating system, they will be burned away in a short period of time.
Brick is very dense and consists primarily of iron oxide.
Life expectancy of Steffes ETS brick is estimated in excess of 50 years.