Transmit/Receive Jumper - XCVR2
Click here to see this page in full context

Transmit/Receive Jumper (2-Pole and 5-Pole Only) - XCVR2

THIS PROCEDURE MUST BE PERFORMED BY A QUALIFIED TECHNICIAN.

As described in General Operation (Page 1 of PDF version), the transceiver can be used to transmit or receive. Position the TR/RC jumper (Figure 4) appropriately for the application.

NOTE: The 3-Phase Transceiver can only be used in Transmit Mode.

  1. To use as a transmitter, place the selection jumper on the TR position covering the top and center pins.
  2. To use as a receiver, place the selection jumper to the RC position covering the bottom and center pins.

Links:

Owner's Manual 1200607 Rev 3