The transmitter is capable of transmitting on one of fifteen channels. The DIP switch settings in the Steffes PLC transmitter MUST be set to match the channel setting of the receiving device(s).
To select the power line carrier communication channel desired, use the chart below and set DIP switches 2, 3, 4 and 5 to the appropriate positions. If DIP switch 2, 3, 4, and 5 are all set to the "OFF" positions, the transmitter will not transmit a power line carrier signal.
|
Channel |
DIP Switch #2 |
DIP Switch #3 |
DIP Switch #4 |
DIP Switch #5 |
Channel Speed |
|---|---|---|---|---|---|
|
0 |
OFF |
OFF |
OFF |
OFF |
N/A |
|
1 |
ON |
OFF |
OFF |
OFF |
SLOW |
|
2 |
OFF |
ON |
OFF |
OFF |
SLOW |
|
3 |
ON |
ON |
OFF |
OFF |
FAST |
|
4 |
OFF |
OFF |
ON |
OFF |
FAST |
|
5 |
ON |
OFF |
ON |
OFF |
FAST |
|
6 |
OFF |
ON |
ON |
OFF |
FAST |
|
7 |
ON |
ON |
ON |
OFF |
FAST |
|
8 |
OFF |
OFF |
OFF |
ON |
FAST |
|
9 |
ON |
OFF |
OFF |
ON |
FAST |
|
10 |
OFF |
ON |
OFF |
ON |
FAST |
|
11 |
ON |
ON |
OFF |
ON |
FAST |
|
12 |
OFF |
OFF |
ON |
ON |
SLOW |
|
13 |
ON |
OFF |
ON |
ON |
SLOW |
|
14 |
OFF |
ON |
ON |
ON |
SLOW |
|
15 |
ON |
ON |
ON |
ON |
SLOW |
1. 1000/2000 Series heaters will ONLY receive on slow speed channels.
2. If multiple transmitters are installed on the same distribution transformer, do not use both channels one (1) and two (2).