Mounting - Transceiver
Click here to see this page in full context

Transceiver (Non-Current XCVR1) - Mounting

yellow triangle with exclamation pointCAUTION

CAUTION: Risk of eye injury due to flying debris. Wear eye protection at all times during this installation.

NOTE: Maximum Transceivers per Utility or Distribution Transformer – The transceiver can be installed as a transmitter OR a receiver. Install no more than four transmitters on one distribution transformer. There is no limit to the number of receivers in a system.

  1. Remove Enclosure Cover

    • Rainproof Enclosure

      1. Remove two screws, (1).

      2. Move bottom of cover down 1/2" (12 mm) and toward you, (2), to remove cover.

    • Indoor Enclosure

      1. Remove four screws, (1).

  2. Mount Transceiver

    • Rainproof Enclosure

      Securely mount the transceiver for your application.

      NOTE: 10 – 1/4" (6.5 mm) holes, (1), are provided to attach the rainproof enclosure to the mounting surface.

    • Indoor Enclosure

      NOTE: 4 – 3/16 x 3/8" (4.8 x 9.5 mm) slots, (1), are provided to install indoor enclosure flush mounted.

      NOTE: 4 – 1/4" (6.5 mm) holes, (2), are provided to install indoor enclosure surface mounted.