2-Pole Relay Connections - Transceiver
Click here to see this page in full context

Transceiver (Non-Current XCVR1) - Relay Connections - 2-Pole (Optional)

yellow triangle with flameCAUTION

Risk of fire. Can cause personal injury or death. Use only copper conductors that are rated at 75°C minimum.

  1. If any transceiver relay(s) are NOT being used to control other loads, insulate the ends of the unused wires.

  2. If the transceiver relay(s) are being used to control other loads, one leg of the circuit going to the controlled load will be broken through the relay.

  3. To use controlled-load Relay #1, use the red relay wires, (1). To use controlled-load Relay #2, use the black relay wires, (2).

NOTE: Refer to the Relay Operation section for more information.

Transceivers with time clocks installed are not allowed to have external loads connected to the relays. Doing so is a violation of the Transceiver’s UL Listing.