The mini receiver can receive information on one of fifteen channels, depending on which channel the transmitting device is set to transmit on. The mini receiver and the transmitting device MUST be set to the same channel for proper communication to occur.
To select the Power Line Carrier channel desired, use the chart below and set dip switches 2, 3, 4,and 5 to the proper positions.
NOTE: A specific channel must be selected at time of installation.
|
Channel |
DIP Switch #2 |
DIP Switch #3 |
DIP Switch #4 |
DIP Switch #5 |
|---|---|---|---|---|
|
0 |
OFF |
OFF |
OFF |
OFF |
|
1 |
ON |
OFF |
OFF |
OFF |
|
2 |
OFF |
ON |
OFF |
OFF |
|
3 |
ON |
ON |
OFF |
OFF |
|
4 |
OFF |
OFF |
ON |
OFF |
|
5 |
ON |
OFF |
ON |
OFF |
|
6 |
OFF |
ON |
ON |
OFF |
|
7 |
ON |
ON |
ON |
OFF |
|
8 |
OFF |
OFF |
OFF |
ON |
|
9 |
ON |
OFF |
OFF |
ON |
|
10 |
OFF |
ON |
OFF |
ON |
|
11 |
ON |
ON |
OFF |
ON |
|
12 |
OFF |
OFF |
ON |
ON |
|
13 |
ON |
OFF |
ON |
ON |
|
14 |
OFF |
ON |
ON |
ON |
|
15 |
ON |
ON |
ON |
ON |