The transmitter built into the Steffes CCRP is capable of transmitting on one of fifteen channels. The DIP switch settings in the CCRP must be set to match the channel setting of the receiving device(s).
To select the power line carrier communication channel desired use the chart below and set DIP switches 2, 3, 4, and 5 to the appropriate positions. If DIP switches 2, 3, 4, and 5 are all set to the "OFF" positions, the CCRP will not transmit a power line carrier signal.
NOTE:
If utilizing the built-in PLC transmitter, a specific channel MUST be selected.
1000/2000 Series heaters will ONLY receive on slow speed channels.
If multiple transmitters are installed on the same distribution transformer, do not use both channels one and two. Select one of these channels along with another available "slow" channel.
|
Channel |
DIP Switch #2 |
DIP Switch #3 |
DIP Switch #4 |
DIP Switch #5 |
Channel Speed |
|---|---|---|---|---|---|
|
0 |
OFF |
OFF |
OFF |
OFF |
N/A |
|
1 |
ON |
OFF |
OFF |
OFF |
SLOW |
|
2 |
OFF |
ON |
OFF |
OFF |
SLOW |
|
3 |
ON |
ON |
OFF |
OFF |
FAST |
|
4 |
OFF |
OFF |
ON |
OFF |
FAST |
|
5 |
ON |
OFF |
ON |
OFF |
FAST |
|
6 |
OFF |
ON |
ON |
OFF |
FAST |
|
7 |
ON |
ON |
ON |
OFF |
FAST |
|
8 |
OFF |
OFF |
OFF |
ON |
FAST |
|
9 |
ON |
OFF |
OFF |
ON |
FAST |
|
10 |
OFF |
ON |
OFF |
ON |
FAST |
|
11 |
ON |
ON |
OFF |
ON |
FAST |
|
12 |
OFF |
OFF |
ON |
ON |
SLOW |
|
13 |
ON |
OFF |
ON |
ON |
SLOW |
|
14 |
OFF |
ON |
ON |
ON |
SLOW |
|
15 |
ON |
ON |
ON |
ON |
SLOW |