Connects directly to the Comfort Plus Hydronic system to interface with the internal controls of the system for automatic operation.
Specifications:
Wattage: 130 Watts
Motor: .1 HP, 60 Hz
Voltage: 208/240 VAC
Maximum Static Pressure: .15 inches Water Column
CFM @.15 SP: 130 CFM
NOTE: In applications where the Steffes air handler is already being utilized, the static heat recovery unit would not be needed.
NOTE: If the area available to install the Comfort Plus Hydronic system is less than 100 square feet, Steffes recommends installing a low voltage cooling thermostat, (connected between R and G) to maintain a room temperature of less than 85°.