Specifications - 2100 Series

MODEL	2102 Plug-in	2102	2103	2104	2105	2106
Charging Inputs Available - kW kW input must be specified at time of order. The appropriate model and kW input for your application will depend on heat loss of the area intended to be heated and the number of power company off-peak hours available. Contact your local power company, a contractor or Steffes for assistance in selecting an appropriately sized system.	1.32	2.4, 3.0, 3.6	3.6, 4.5, 5.4	4.8, 6.0, 7.2	6.0, 7.5, 9.0	7.2, 9.0, 10.8
Length - inches	30	30	37	44	51	58
Height - inches	25.3	24.5
Depth - inches (Installed w/ Bracket)	10.75 (12.25) The security base of 2102 Plug-In heaters sets the heater 1.5" from the wall and the front of the base protrudes 2.5".	10.75 (12.25)
Number of Bricks	16	16	24	32	40	48
Number of Brick Pkgs.	8	8	12	16	20	24
Approximate Heater Weight	114 lb	98 lb	118 lb	137 lb	156 lb	174 lb
Approximate Brick Weight	178 lb	178 lb	267 lb	356 lb	445 lb	534 lb
Approximate Installed Weight	292 lb	276 lb	385 lb	493 lb	601 lb	708 lb
Element Voltage Refer to the Unit Identification Label on lower left side panel for data specific to your heater.	120	240/208 Standard (208 or 277 optional as special factory order) / 60 Hz NOTE: The 240V Element circuits can be connected to 208V in standard configurations; however, the charging input of the system will be derated by 25%.
Blower/Control Voltage	120	240 Standard / 60 Hz 120 or 208 (optional as special factory order)
Blower Wattage Minimum Maximum	30 132	30 132
Storage Capacity kWh BTU	13.5 46,062	13.5 46,062	20.25 69,093	27 92,124	33.75 115,155	40.5 138,186